contador Saltar al contenido

How to solve iPhone white screen

In this guide we want to help you solve the problem of iPhone white screen which appears permanently, using the methods of hard reset, recovery and DFU mode. If your iPhone suddenly shows a bright and empty display, it could suffer from the dreaded white screen. Don't worry, this can be solved, just follow our guide and we hope that your device will be resurrected again.

IPhones are extremely reliable devices, but even the best ones can encounter problems sometimes. One of the most feared problems is the so-called "white screen iPhone", which turns the display of your expensive smartphone into something more than a desk lamp, emitting only white light. In a previous guide we also saw how to fix iPhone black screen.

In many cases it is not as serious to have iPhone white screen as it may seem, and it can be solved by a small procedure. If you have this problem, below we show you some ways to revive your iPhone and free it from the risk of an apparent death.

What causes the white screen iPhone problem?

iPhone white screenThere are two main culprits when it comes to this particular iPhone white screen problem: software or hardware. Now, we know that practically all the problems fall into one of these two fields, but I also know that the white screen caused by both, which can make the diagnosis a bit more problematic.

From the software point of view, users often experience the iPhone white screen problem if they tried to install an update, or tried to jailbreak their phone.

A failed installation, due to a corrupt file or something wrong during the process, can easily lead to this condition. But this is actually the best scenario, as it is not difficult to correct.

The other suspects a hardware problem, which normally occurs after the phone has suffered impact damage. In this case it can be solved by the user only in some cases, and if the LCD cable is disconnected inside the unit, you must take it to the Apple Store and have it repaired.

1. Solve with a reset of your iPhone

The first thing to try in the case of iPhone white screen simply the restoration of the device. To do this you will need to hold both the and simultaneously Home buttonthat the On / Off button until the Apple logo appears.

Now you can let it go, and I hope that after restarting the iPhone you will once again see the normal Home screen.

Those who have an iPhone 7 or 7 Plus will have to use a different combination, as the Home button uses software instead of mechanical switches. In this case you will need to hold the On / Off button and the key Volume down at the same time, until the Apple logo appears.

Turning to the iPhone X, which has no Home button at all, Apple has changed the procedure again. This time you'll have to do some finger dance to make things work.

Briefly press the button Volume up, then move up Volume down for the same time interval. Let go and hold the On / Off button on the right side of the device. Keep this for about 10 seconds until you see the screen go black. Now you can release the On / Off button and your iPhone should restart.

2. Use Recovery mode with iTunes

If restoring your iPhone doesn't solve the problem, you can always try using iTunes to reinstall iOS.

To do this, first you need to update iTunes on your Mac or PC to the latest version. Then, close iTunes and connect iPhone to your Mac or PC using the Lightning charging cable.

Start iTunes again and then use the button combinations listed in the previous section to restart your iPhone.

When your iPhone starts rebooting, you should see a message on your Mac / PC indicating that there is a problem with the device and that you need to restore or update it. Click Refresh and iTunes will attempt to reinstall iOS leaving the user data intact.

3. Use DFU mode with iTunes

If none of the above options gave you any results, you can try to access the device firmware update mode (DFU). This differs from the recovery mode in that it does not allow the iPhone to start its bootloader or iOS, but still able to communicate with iTunes.

Using this technique, you can restore the iPhone to its original settings, then use iCloud or iTunes backups to reload the data.

Getting into DFU mode is rather risky, and there is a good chance you can be wrong. But proceeding carefully, you should eventually be able to repair iOS.

On previous iPhones up to and including iPhone 7 and 7 Plus, you can follow our guide on how to restore iPhone with recovery mode and DFU mode.

If you have an iPhone 8, 8 Plus or X, the method is as follows:

First, connect the iPhone to the PC / Mac using the Lightning cable, then start iTunes. Now, press the button briefly Volume up, do the same with the button Volume down, then press and hold the On / Off button on the right side of the iPhone until the screen turns black.

Hold the On / Off button, and now hold the button again Volume down. Count up to five, then release the On / Off button, but keep the button pressed Volume down for about another ten seconds. The screen should be black, so if you see the Apple logo appearing at any time, it means you accidentally entered recovery mode.

On your PC / Mac you should see an iTunes message that says it has detected an iPhone in recovery mode and gives you the option to restore the iPhone. Click on this and hopefully have a fully functional system at the end of the process.

To exit DFU mode, simply use the combination of buttons for your device that you normally use to put it into recovery mode.

time to take a trip to the Apple store

If after all these attempts you still can't make your iPhone work, you seem to have a hardware problem. While you can find several guides to correct them online, we recommend that you book an appointment at the Apple Store, at least to understand what's wrong.

We hope it's not a fatal mistake, but if it is, consult the latest available laptops while you're there, because you may have to buy another one.